16
Int
rod
uc
tion
IR Receiver Cable Directions
Plug the IR receiver into the ZIG-POC-70-Tx
“IR IN” port and place the IR receiver so you
can point to it easily with your IR remote controller.
The IR receiver is designed to work on the “Rx” receive side of the extender.
The IR input on the “Tx” transmitter side is designed to receive commands directly from
control processor and is not intended to be used in conjunction with IR receiver.
IR Emitter Directions:
Plug any third party IR emitter into the ZIG-POC-70-Tx
“IR OUT” port and place the IR
sensor directly on the IR window on the front panel of the device you intend to control.
