13 of 19
ZIG-PHASED 1x2 Repeater User Manual
UM-001-0001-000-01 | March 12, 2021
© 2021 Zigen Corporation
www.zigencorp.com
Z
IG
-P
HA
S
E
D
Us
er Ma
nu
a
l
4
Installation
Video
1.
Use an HDMI cable to connect UltraHD sources to the Input on the front panel of the unit.
2.
Use a HDMI cables to connect displays or any other sinks to the Output on the rear panel of the
unit.
The HDMI cable can then be connected in any of the following ways:
•
Connect the HDMI cables to an Ultra HD display.
•
Connect the HDMI cables to another Zigen switch or splitter, for cascading purposes.
Note: Zigen highly recommends the use of premium 4K certified HDMI cables when
viewing UHD 60p 4:4:4 or UHD 60p HDR 4:2:2 video resolutions. Zigen offers these
premium 4K certified cables in varying lengths from 3 meters to 9 meters.
Audio
3.
Determine the audio interconnect requirement in the installation. For multi-channel surround
sound formats such as Dolby Digital or DTS, use the Optical interface or ARC passed through the
HDMI input.
4.
To connect to multi-zone amplifiers with pre-amp analog inputs, connect the ZIG-PHASED
unbalanced RCA or professional-level balanced audio connectors to the amplifiers. The audio
source can be selected from either the HDMI input or ARC from HDMI Output 1.
Power
5.
Connect the included 12V DC locking power supply to the 12V DC power receptacle on the rear
panel of the switch.
6.
Connect the power supply to an electrical outlet.
IMPORTANT:
Remove power from the ZIG-PHASED when connecting new video and
audio cables or changing the video and audio cable interconnects. Failure to do so
could cause irreparable damage to the unit or cause injury to installers and end-users.
IMPORTANT:
Ensure that all video, audio, and control port interconnects are properly
connected before applying power to the unit. Failure to do so could cause irreparable
damage to the unit or cause injury to installers and end-users.
Installation
