Matrix Switching System
—
User Manual
28
7.0.3.4 Other Application
The software utility will show you at least 32 unit host ID and Name. You can click the
Console
down list to select which Host that you want to configure output /input values as
Fiugure 7-14. The entire connected Host name will be shown on the
Console List
as
figure 7-15. For this model, the software utility only shows an ID:00 for the Name: HX-88
presently.
When the
Console List
is empty, please pay attention to the location of switch 1 on
the rear panel of Host is correct. Then, click
Scan
to research the configured Host. For
HX-88 model, only have to make the
Console
down list value to
“00”
.
Figure 7-14 Figure 7-15
