6
3
Configure Network
LED indicator
The LED status gives the following information of the occupancy
sensor:
LED Status
What it means
No light
Device has joined a ZigBee network.
Continuous and slow
flashing
Device has not joined a ZigBee network.
Flashing once
Presence detected
When you press the reset button once
Flashing once
Device has joined a ZigBee network.
Flashing three times
Device has not joined a ZigBee network.
3.1 Before starting, you will need:
• A ZigBee Gateway.
3.2 Adding to the gateway's network
：
Follow the steps below to join the occupancy sensor to the gateway's
network:
1. Power on the occupancy sensor, the LED indicator will start
continuous and slow flashing, which meas it is ready to join the
network. If not, please reset it.
2. Set your gateway to permit joining.
3. The occupancy sensor will join the gateway's network automatically
and the LED indicator will go out when successfully joined.
