ZIGBEE 70100003 Quick Start Manual Download Page 4

Page: 4 / 4

Mounting

The key part of this controller is an universal one, especially rotary standard switch element that can be

integrated in numerous frames by different manufactures as below list:

BEKER

S1, B1, B3, B7 glass

GIRA

Standard55, E2, Event, Esprit

JUNG

A500, Aplus

MERTEN

M-smart, M-Arc, M-Plan

①

silicone gel battery cover

Use tool to open the

1.Remove battery insulator

2.Install the controller to wall(2 methods)

Method 1:

Stick 3M glue on the

back of the bracket and then stick
the bracket to the wall

Method 2:

Screw the bracket

to the wall

After the bracket is fixed,clip
the frame and control part to the
bracket

in sequence

②

Pull out the

battery insulator

③

Install the silicone

battery cover back

Installation

Summary of Contents for 70100003

Page 1: ...ices via touchlink commissioning without coordinator Supports find and bind mode to pair with ZigBee lighting devices Supports 1 group for binding max 30 lighting devices 2 4 GHz global operation Long...

Page 2: ...how ZigBee Lighting Device 10cm Step 2 Bring the remote within 10cm of the lighting device Step 3 Press and hold down until LED indicator turns on Step 4 Immediately short press twice to start TouchL...

Page 3: ...iscover and add devices LED indicator will flash twice 180 seconds timeout repeat the operation Step 5 Set another remote into network pairing mode and pair it to the network refer to its manual 13 OT...

Page 4: ...Aplus MERTEN M smart M Arc M Plan silicone gel battery cover Use tool to open the 1 Remove battery insulator 2 Install the controller to wall 2 methods Method 1 Stick 3M glue on the back of the brack...