2
Introduction
1
The LED624 ZigBee RGB LED bulb allows you to switch it ON and OFF and
adjust its color as well as set a switching schedule by the mobile app.
This guide will provide you with an overview of the product and help you
get through the initial setup and installation.
Get started
2
3.1 To get started, you will need:
A ZigBee Gateway.
The mobile app.
3.2 Set-up the LED bulb
Step 1: Install and power on your LED624 LED Bulb, it will flash once to
indicate it is ready to join the gateway (reset it if not).
Step 2: Select “Add new devices” in the menu of the app.
Tip: for this step, you can also press the “Z” button of the gateway for two
seconds until the LED indicator turns solid blue.
Step 3: The LED Bulb will join the the gateway automatically, and flash once
when it has connected to the gateway. You may now use your phone to turn
ON/OFF the bulb, adjust the brightness and color.
Note: If the LED bulb failed to join the gateway, please refer to the FAQ
section to reset the bulb to factory default setting and retry above steps.