Procedure for connecting the adapter
1. Plug the USB cable into the adapter and connect to the computer.
2. If necessary, secure the cable ties at the recess in the housing using cable ties.
3. To update the I/O printed circuit board, connect the additional connection cable
article no. 00166181 to the adapter and connect to the ECblue.
–
Connect the black cable to the GND terminal.
–
Connect the red cable to the 24 V terminal.
After completing the update or programming, remove the cables and disconnect the
adapter. Fit the cover on the slot or replace the AM-STICK-WB if installed.
Re
fi
t the cover of the controller housing using the speci
fi
ed torque, see ECblue assembly
instructions.
Operating Instructions
IF-ECblue
Inserting and connecting the service adapter
L-BAL-E327-GB 2023/19 Index 001
Part.-No.
8/11
