Operating instructions
Gateway ZAbluegalaxy / DIG-2019NE
•
Introduction
L-BAL-312-GB 2020 Index 001
8/23
1.3
Safety Instructions
Refer to page 3 for an explanation of the warning notice system.
-
Mounting, electrical connection, and start-up operation may only be carried out by an electrical
specialist in accordance with electrotechnical regulations (e.g. DIN EN 50110 or DIN EN 60204)!
Persons entrusted with the planning, installation, commissioning and maintenance and
servicing in connection with the device must have the corresponding qualifications and skills for
these jobs. In addition, they must be knowledgeable about the safety regulations, EU directives,
rules for the prevention of accidents and the corresponding national as well as regional and in-
house regulations.
-
The equipment is to be used solely for the purposes specified and confirmed in the order. Other
uses which do not coincide with, or which exceed those specified will be deemed unauthorised
unless contractually agreed. Damages resulting from such unauthorised uses will not be the
liability of the manufacturer. The user will assume sole liability.
-
It is strictly forbidden for work to be carried out on any components while they are connected to
live voltage.
-
The owner is obliged to ensure that the device is operated in perfect working order only.
-
Electrical equipment must be checked regularly: Loose connections are to be retightened and
damaged lines or cables must be replaced immediately.
-
Never clean electrical equipment with water or similar liquids.
1.4
Installation and Maintenance
DANGER: Electrical Shock
Danger to life.
This product operates with 9..32 V DC SELV power supply. Do not connect this product
to an improper power supply (No AC power, no more than 32 V DC/DC or no non-SELV
circuit)!
DANGER: Electrical Shock
Danger to life.
The IO interfaces (connectors) of the product are only suited to be connected to SELV
circuits. Use interfaces (connectors) for their intended use only.
CAUTION: Explosive Risk
The installed computer board is equipped with a Lithium battery.
Danger of explosion if battery is incorrectly replaced. Replace only with battery of the
same or equivalent type.
CAUTION: Fire Risk
The digital IO must be powered by a SELV power supply, that complies with the
requirements of a limited energy source (LPS) (By using an appropriate supply or an
external fuse).
WARNING: Burns Hazard
The product generates considerable amount of heat. The housing transports this heat to
the environment and therefore gets hot.
Caution when touching the housing, burns
hazard
!
