6.2.2 Auto Addressing
Auto Addressing
Automatic addressing
Open menu with the
P
key and close it again with the top left key
◄
.
Start
P
Start automatic addressing with the
P
key.
Please Wait
Count: 0
Done
The number of the addressed members is displayed as a result.
For further details
see AM-MODBUS(-W) operating instructions.
6.2.3 Load Paramterset
Information
Befopr a parameter set can be loaded into the terminal, this must be saved in the AM-
MODBUS(-W) (
menu group
“
Start
”
/
“
SAVE
”
).
Load Parameterset Open menu with the
P
key and close it again with the top left key
◄
.
PIN input
PIN input. In the download only parameters for the entered authorisation are
considered (
operating manual AM-MODBUS).
•
PIN 0010
: Opening service menu (Controller Setup, IO Setup, Motor
Setup), for programmed access level <2.
•
PIN 1234
: Opening user menu (Setting) for programmed access
level <1.
•
PIN 3698
: Assumption of the communication parameters (Address,
Com Baudrate, Com. Mode).
0000
Interface
Select used interface:
RS-485
For members with integrated communication module AM-MODBUS (RS-
485).
Wireless
For members with integrated communication module AM-MODBUS-W (wire-
less).
Select device
Select the address of the desired member with the
▼
+
▲
keys and con
fi
rm
with the
P
key.
247
RF Network Key
Wireless
Only for communication wireless:
Select radio control key with the
▼
+
▲
keys and con
fi
rm with the
P
key.
9999
Parameterset
Files
Operating Instructions
A-G-247NW
Programming
L-BAL-E184-GB 1309 Index 002
Part.-No. 00163401-GB
12/21
