21
INSTALLATION
DANGER!
– The machine can tip!
➢
Impact: Danger to life or of serious injuries.
➢
Apply the transport lock
➢
Secure the machine correctly with tension belts
➢
Ensure that the machine has a steady position and let it down slowly.
➢
Ensure sufficient chain tension.
➢
Switch off the motor and activate the lowering lock before commencing
any work on the machine
➢
Persons must not be in the danger area.
➢
Use sufficient lifting gear
➢
Comply with the regulations for lifting gear
PLEASE NOTE
– Fit seals
Impact: Seals not tight
➢
Comply with the correct sequence before fitting any form of seal
4.1 General transport
Transport on a HGV
When transporting the pickup on a HGV, always use the ZIEGLER transport frame.
Secure the pickup against falling down using tensioning belts in accordance with the locally-valid regula-
tions.
Ensure that the machine has a steady position.
Transporting the machine on the company premises with a crane
The pickup can only be transported from above with a crane. Use the suspension points intended for sus-
pending the load. Ensure that the picker is always in balance and that the load is distributed evenly.
Use only suitable lifting gear to perform the transport.
Switch off the motor and activate the lowering lock before commencing any work on the
machine.
Persons must not be in the danger area.
Fig. 3
