36
SAFETY
3.1 Identification of advice in this operating instructions
The safety advice provided in these operating instructions which can cause danger to personnel in the
case of non-compliance is marked with general danger symbols:
3.2 Identification of danger signals
Danger!
DANGER!
–Type and source of the danger!
Impact: Danger to life or of serious injuries.
➢
Measures for danger prevention
Warning!
WARNING!
– Type and source of the danger!
Impact: Injuries, serious damage to material.
➢
Measure for damage limitation
Caution!
WARNING
– Type and source of the danger!
Impact: Material damage
➢
Measure for damage limitation
Please note
PLEASE NOTE
– Type and source of the danger!
Impact: Economic use of the machine
➢
Measures to be performed
Warnings placed directly on the machine always require compliance and are to be maintained
in a completely legible manner.
3.3 Personnel qualification and training
The machine may only be used, serviced and repaired by those who are familiar with it and have been
informed about the dangers involved. The area of responsibility, responsibility and monitoring of
personnel have to be regulated clearly by the owner. Personnel lacking any requisite knowledge must
be trained and instructed. The owner has to ensure that the personnel has read and understood
entirely the specifications of the operating instructions.
Repair work not described in these operating instructions may only be performed by an authorized
specialized garage.
3.4 Dangers due to non-compliance with safety instructions
Non-compliance with the safety instructions can result in threats for persons, environment and the
machine itself. In addition it can result in loss of all liability cover.
Non-compliance can result in the following threats:
➢
Threats to persons due to unsecured working areas
➢
Failure of important machine functions
➢
Failure of the prescribed methods of maintenance and repair
➢
Threat of persons due to mechanical and chemical influences
➢
Threat of the environment due to leakage of oil
3.5 Safety conscious working
The safety instructions, existing instructions to accident prevention as well as internal work and safety
instructions of the operator have to be considered.
The health and safety and accident-prevention regulations of the appropriate professional associations
are mandatory.
