25
Fig. 21
Hillside combine drive
All cornheaders are driven via drive shafts directly
mounted by hand.
Specific combinations of combine harvester - picker
require a wide angle or special drive shafts.
Comply with all the regulations and the drive shaft
designs.
Check the pivot area and length of the
drive shaft before commissioning. Ensure
sufficient coverage.
The bracket (T) serves to accept the drive shaft dur-
ing transport.
4.5 Hydraulic connections
Fig. 22
Multicoupling
If the combine harvester is fitter with a multicoupling,
the picker should also be fitted with a multicoupling.
The correct coupling is included in the scope of de-
livery.
Operation is performed in accordance with the regu-
lations and instructions of the manufacturer of the
combine harvester.
Connection via the control valve coupling
Some brands of combine harvesters require a con-
trol valve coupling to connect a header.
The corresponding pickers are fitted with the requi-
site technology on a serial basis.
Operation is performed in accordance with the regu-
lations and instructions of the manufacturer of the
combine harvester.
Avoid the danger area when performing a
functional check. Check for leaks.
Should you find a leak, comply with all
the requirements of environmental pro-
tection. Wear the corresponding protec-
tive clothing.
T
