61
Fig. 120
Connect the hoses (A and B)
Fig. 121
With the drive below, the pump (A) must be in-
stalled.
Fig. 122
Connect the hydraulic hoses (A,B,C) on the
right-hand side
After installing, remove the centre of the three
flat-headed screws in the side hood (E) and fit
the hose clamps (see Fig. 122 and Fig. 120)
Fig. 123
Install the hydraulic hoses, divide the hose
clamps equally, set the drillholes and screw on
the hydraulic hoses with hose clamps.
B
A
A
B
A
D
C
E
B
B
B
