24
Fig. 18
Additional weights
Depending on the weight of the installed cornhead-
er, additional weights may be required on the steer-
ing shaft of the harvester.
The dimensions of these additional weights are
specified in the motor vehicle certification of the
combine harvester handbook.
Comply with the certification conditions
for public traffic.
Fig. 19
Stubble breaker (optional)
The stubble is broken down directly behind the pick-
ing row before it can cause permanent damage to
the tyres.
The pre-tension is generated via the compression
spring (S) so that the pivotally arranged plate (F)
also reaches the stubble once the picker has been
pulled out.
4.4 Cornheader drive
Fig. 20
Drive shaft
The cornheader is driven with a drive shaft.
Ensure that the drive shaft guard is secured against
revolution by a chain (K).
If the combine harvester is fitted with an angling
blade, check the cover when it is swung out.
Remove and read the special instructions for the
drive shaft before commissioning.
Grease the shaft profile of the drive shaft connection
once a year.
Check the safety equipment (S) before
commissioning. Do not open or remove
these during operation.
Switch off the diesel motor when perform-
ing all work on the machine.
Secure the drive shaft guard against revolution.
Replace the damaged protection immediately.
S
F
K
S
v
