ASSEMBLY INSTRUCTIONS
Turn the
TABLE (F)
upside down onto a stable flat surface. Insert the four
LEGS
(A), (B), (C), (D)
as shown so that the legs all lean outwards. The
RIGHT SIDE
LEGS (C) AND (D)
with axle holes need to be both on the same side as shown.
Secure each leg with one
M6 X 50mm BOLT (M)
and one
M6 NUT (N)
. Don’t fully
tighten yet.
Step 1
LEFT BACK LEG (B)
RIGHT BACK LEG (D)
(WITH AXLE HOLE)
LEFT FRONT LEG (A)
RIGHT FRONT LEG (C)
(WITH AXLE HOLE)
FRONT
M6 X 50mm BOLT (M) 4 PCS
SPANNER (R) 1 PC
ALLEN KEY (Q) 1 PC
M6 NUT(N) 4 PCS
TABLE (F)
