Ziebane Instruments RX 207 Live, Owner'S Manual, Page: 15 / 26

Ziebane Instruments APT Series Operation Manual © Ziebane 2011
Detailed Overview
APT Series RX-207 Realtime Remixer
24 Ninjas Effect section
This effect is designed to give RX-207 human touch. Basicly, a small variations on sound groups are calculated in real time.
Sound groups: - arpeggio - instrument - kicks - snares - hats - rolls
Effect variatons: - paning - tuning - dynamics
A
I
K
S
H
R Arps
Instruments
Kicks
Snares
Hats
Rolls 1
2
3
4
< >
0 Panning
Tuning
Dynamics
Speed
Automatic
Buttons Sound groups Effect functions X Y screen
If you want analogue feel, wich will change over time, klick on big button on middle of effect section until it’s lit. Now assigned “ninja”
should run by itself. See him/her? To increase/decrease “ninjas” speed, use buttons with <,> symbols.
Again, you can secure ninja with left click, or drag him around with a mouse cursor.
Manually controling 24 Ninjas
With your mouse, click on button with “K” symbol on it meaning Kicks group and than click on “1”. 1 is for paning.
Now you have enabled pnning on kick group. Try to move your mouse across little screen. You can hear diference in paning. If you
want to secure ninja to certain pan percentage, left-click on little screen. To unsecure ninja position, just click right mouse button
anywhere on RX-207.
Same goes for other effects.
Automatic mode for 24 Ninjas
Please note, 24 Ninjas effect can be heavy on computer. If you experience problems, re-
strain from using this effect. However, on good hardware there should be no problems.
note 1.1
note 1.1
13
1 2 3 4
K S H R
>
<
A
I
0
9. INI.T
“INI.T” is displayed on LED screen. If you don’t like custom preferences of MODE 9, or don’t want them to
load on start, perform Initialization. This will replace custom settings with factory ones. These settings are
saved in User Pattern 208, witch can not be replaced or modified from within RX-207. You can of course do it
manually, but this can cause undesired operation of RX-207 if you are not exactly sure what you are doing.
Before executing this system save, go to Bank1, perform KILL ALL, stop engine with Space
and retriger RX-207 once or twice. This way you will have optimized, clean perferences.
8. SAV.E
“SAV.E” is displayed on LED screen. Upon launch, RX-207 always checks for MODE 9 specifications and loads
them if they exist. They are saved in User Pattern 00 and can be replaced with this command. If you want
personal feeling of instrument, you will use this feature. When satisfied with tunings and other stuff, just hit
Enter and they will be saved. Don’t worry, you can recall factory settings with next function.
Enter
Enter
10. CAC.H
This puts your samples to cache. This way you avoid possible small silence when program first encounters
a sample. Use this when changing sound banks while RX-207 is running. If you are not changing banks mid
work, don’t worry, RX-207 puts samples to ram on start.
Enter
fig.1.1
fig.1.1
fig.1.1
fig.1.1