Page
32
PM Timers
The following four modes are Green PC power saving functions which are only user configurable when User
Defined Power Management has been selected. See above for available selections.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will be powered down while all
other devices remain active.
Doze Mode
When enabled and after the set time of system inactivity, the CPU clock will run at slower speed while all
other devices still operate at full speed.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU will be shut off.
The Choice: Instant-Off, Delay 4 Sec.
PM Events
PM events are I/O events whose occurrence can prevent the system from entering a power saving mode or can
awaken the system from such a mode. In effect, the system remains alert for anything which occurs to a device
which is configured as On, even when the system is in a power down mode.
HDD / COM / LPT / VGA Ports Activity
- Options :
Disable / Enable
IRQ [3-7,9-15], NMI
- Options :
Disable / Enable
IRQ 8 Break Suspend
- Options :
Disable / Enable
Power Button Over Ride
- Options :
Delay 4 Sec / Instant Off
Ring Power Up Control
- Options :
Disable / Enable
LAN Power Up Control
- Options :
Disable / Enable
Power Up by Alarm
- Options :
Disable / Enable
Month Alarm
- Option :
1 / 0
Day of Month Alarm - Option :
1 ... 31
Week Alarm - Set the option
on/off for *** SUN....SAT***
Time ( hh:mm:ss) Alarm - Set the time for Alarm
