4
LCD interface instruction
a.
Scan symbol
b.
Measure data
c.
Temperature value for Max/Min
d.
Data hold symbol
e.
Laser on symbol
f. Lower power symbol
g. C/F symbol
Measurement operation
①
Hold the meter by its
Handle Grip
and point it toward the surface to be measured.
②
Pull and hold the
Trigger
to turn the meter on and begin testing.
③
Release the Trigger and the HOLD display icon will appear on the LCD indicating that the
reading is being held. In HOLD status, press the MAX/MIN button to display maximum and
minimum measurement points in the last measure.
④
The meter will automatically power down after approximately 10 seconds without use.
Switching C/F
Short press the C/F button
Switching Max/Min
Press the Max/Min button.
Switch on/off laser and backlight
Short press the
Laser/ Backlight
button to turn on/turn off the l backlighting.
Long press the
Laser/ Backlight
button to turn on/ turn off the laser.
When the laser is on the laser icon will appear on the LCD over the temperature.
