11
displays between the pressing and releasing the "ON/OFF"
button each time
MEASUREMENT OPERATION
①
Hold the meter by its
Handle Grip
and point it
toward the surface to be measured.
②
Pull and hold the
Trigger
to turn the meter on and
begin testing. The display will light if the battery is
good. Replace the battery if the display does not
light.
③
Release the Trigger and the HOLD display icon
will appear on the LCD indicating that the reading is
being held. In HOLD status, press the UP button to
turn on or off the laser. And press the DOWN button to
turn on or off the backlight.
④
The meter will automatically power down after
approximately 7 seconds after the trigger is
released.(Unless the unit is locked on)
Note: Measurement considerations
Holding the meter by its handle, point the IR Sensor
toward the object whose temperature is to be measured.
The meter automatically compensates for temperature