9
they are properly inserted.
DATA HOLD BUTTON
The Data Hold function allows the meter to "freeze" a
measurement for later reference.
1.
Press the DATA HOLD button to “freeze” the reading on
the indicator. The indicator “HOLD” will be appear in the
display.
2. Press the DATA HOLD button to return to normal
operation.
BACK LIGHT BUTTON
1. The BACK LIGHT button is used to turn the back light
on or off. Press the BACK LIGHT BUTTON to turn the
back light on.
2. Press the BACK LIGHT BUTTON to turn the back light
off.
OPERATING INSTRUCTIONS
1. ALWAYS turn the function switch to the OFF position
when the meter is not in use.
2.
If “OL” appears in the display during a measurement,
the value exceeds the range you have selected.
Change to a higher range.
NOTE
: On some low AC and DC voltage ranges, with the
test leads not connected to a device, the display may show
a random, changing reading. This is normal and is caused
by the high-input sensitivity. The reading will stabilize and
give a proper measurement when connected to a circuit.
WARNING
: Risk of electrocution. High-voltage
circuits, both AC and DC, are very dangerous
and should be measured with great care.
