4
31
•
Always remove the plug of the unit from the wall socket when it is not in use.
•
A damaged power cord or plug must always be replaced by a recognised
electrician or your supplier.
•
Avoid using the AC/DC switching mode power supply in wet or damp place,
and position it in areas where the air ventilation is good.
•
If the unit has been properly connected and no power is flowing, have the
AC/DC switching mode power supply checked by a qualified electrician to
ensure that the fuses inside the switching mode power supply are not faulty.
•
Always keep the unit at an up-right position to avoid water leakage.
•
The thumb should be placed at the top centre of the unit while lifting by the
lift-slot (7), to avoid tilting. At the same time, the other hand should be
holding the base to secure the unit. [as Fig. 1]
•
Do not use the dehumidifier in combination with an other power source then
the one enclosed, to prevent damage to the unit and dangerous situations.
B
CONNECTION
After removing the packaging materials, there should be 2 items:
a. Zibro Dehumidifier
b. AC/DC switching mode power supply (220/240 V / 13V)
Plug the DC power jack (11) of the switching mode power supply to the DC
power socket (8), then connect the AC plug (12) of the switching mode power
supply to the appropriate main socket.
C
CONTROLS
Press the button (1) to position
, the Zibro will begin to operate. The green
LED will be turned on. Listen and feel for the air blowing from dry air outlet.
[as Fig.2]
To switch off the unit, press button (1) to ‘off’ position, the Zibro will be
turned off. [as Fig.3]
2
1
2
1
Fig. 1
Fig. 2
Fig. 3
WARNING
G
-
To avoid electric shock. Do not open. There are no user serviceable parts
inside.
-
Any repair work must be done by qualified technician appointed by our
distributors.
-
Specifications are subject to change for improvement without prior notice.
G
ATTENTION!
• Never use the device with a damaged power cord, plug, cabinet or control
panel. Never trap the power cord or allow it to come into contact with sharp
edges.
• Failing to follow the instructions may lead to nullification of the guarantee
on this device.