Shanghai Zhuoyi Electronic Co.,Ltd.
Add: 1# Building, No.118 Hangtou Rd., Pudong, Shanghai, China
Tel: 0086 21 33893666 33750266 Fax: 0086 21 33893668
Http://www.zhuo-yi.com Email: [email protected]
days), the selected parameters is blinking.
3. Parameter settings adjust: Press "+" button or "-" button to adjust the selected hours,
minutes, seconds, days.
4. Setting confirm: press the "function" key and move to the next functional module,
or long press it and back to the state clock display.
●
Timing Settings
1. Function options: Click "Function" button, select the settings function menu, "Program"
displays.
2. Parameters options: press the "Select" key to select the time parameter (hours, minutes),
the selected parameter is blinking.
3.Time parameter settings adjust: Press "+" button or "-" button to select the time parameter
(hours, minutes)and set 1
ON
program
4. Days Settings: select "Day" key, press "Subtractive" key to determine on or off state (it
displays "on" or "off"). Press "addend" button to select other days, and press
"Subtractive" key to determine on or off state again. In turn set the other days. Day
settings, set to "on" and the day displays on the monitor; set to "off" days not shown.
5. Loop setting: Press "Select" key to select circuits, then 1-circuit is flicker. Click
"subtractive" key to determine on or off state. "On" means the open time of 1-circuit, "off"
means the off time of it. Click "addend" button to select the other circuit, and press
"Subtractive" key to determine on or off state. In turn set the other circuits. Circuits
settings, set to "on" and the circuit displays on the monitor; set to "off" circuits not shown.
6. Click "select" button, select the program group number, and press addend key to set the
other programs (2
ON,
2
Off
, 40
ON,
40
Off
).
Notice:
■
When make an error or cancel the settings, press “Addend key ”or” Subtractive
key” to select the group number, then press ”Manual key” to make it display “—
—
：
— —” ( it means no timing program, not "00:00").
■
If you set the switch-on time, you must set the switch-off time to correspond.
●
Installation Dimensions
●
Connection Method
ZYT09
Po wer
Wir in g d iag r am
Power AC220V
L oad AC220V
Mon Tue Wen Thu Fri Sat Sun
A u to
