background image

 

 

20 

EMI Notices 

United States – EMI Notice: 

This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to 
provide reasonable protection against harmful interference when the equipment is 
operated in a commercial environment. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful interference 
in which case the user will be required to correct the interference at his own expense. 

The authority to operate this equipment is conditioned by the requirements that no 
modifications will be made to the equipment unless the changes or modifications are 
expressly approved by Zhone Technologies, Inc.. 

If the equipment includes a ferrite choke or chokes, they must be installed per the 
installation instructions. 

Canada – EMI Notice: 

This Class A digital apparatus complies with Canadian ICES-003. 

Cet appareil num rique de la classe A est conforme   la norme NMB-003 du Canada. 

ACTA Customer Information 

This equipment complies with Part 68 of the FCC rules and the requirements adopted 
by the Administrative Council for Terminal Attachments (ACTA). On the bottom of the 
network extender is a label that contains, among other information, a product identifier 
in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the 
telephone company. 

The T1 network connections should be made using a Universal Service Order Code 
(USOC) type RJ48C jack. The Service Order Code 6.0F should be specified to the 
telephone company when ordering the T1 line. In addition, the proper Facility Interface 
Code must be specified to the Telephone Company. The network extender can be 
configured to support any of the following framing format and line signaling techniques. 
The network extender's configuration must correspond to the T1 line's parameters.  

 

Facility Interface Codes 

Code Description 

04DU9-BN 

1.544 Mbps superframe format (SF) without line power 

04DU9-DN 

1.544 Mbps SF and B8ZS without line power 

04DU9-1KN 

1.544 Mbps ANSI ESF without line power 

04DU9-1SN 

1.544 Mbps ANSI ESF and B8ZS without line power 

 

Summary of Contents for TNE1544



























Reviews: