13-4
Voice Cards
Model No.
Running Head
FXO Card User Screens and Settings
FXO Card
Table 13-1. Main Screen Actions
Table 13-2 summarizes the configuration settings for the FXO card, along with the available
and factory-default option settings. The parameters and settings are also described in the
following paragraphs.
Table 13-2. Main Screen Option Settings and Defaults
Notes:
1. Choosing wan allows you to choose a WAN port (w1-1 through w4-2). Choosing serv
lets you choose an ADPCM server card in slot P1, P2, or P3, followed by a logical port
on that card. If your system has the FRS card installed and you want to use voice
compression you need to install the Low Bit Rate Voice (LBRV) card. However, if your
system has the ATM card installed you can proceed directly with voice compression (there
is no need for the LBRV Card to be installed.) The user option is not used. See the
WAN/SRV paragraph that follows.
Action
Function
Save
Saves changes to settings.
Undo
Returns all settings to the last saved state.
Refresh
Updates certain time-related information fields that are not automatically
updated (i.e., test status).
Copy
Copies the contents of the current column to the next column. Useful if you
change a lot of entries in one column and want to repeat those changes in
subsequent columns.
Test
Initiates and monitors testing of all FXO card ports. Refer to the Test section
of this chapter.
Main
Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.
Parameter
User Options
Notes
Default
STATE
stdby actv
stdby
WAN/SRV
none wan serv
user
1
w1-1
TS
01-24 01-31
2
01
MODE
fxo fxodn dpt mrd
fxo
SIGNAL
loop gs lp-fd 1s-R2 gs-a lp-em
3
loop
Rx TLP
-10.0 dB to +2.0 dB
0.0
Tx TLP
-10.0 dB to +5.0 dB
0.0
CODING
u-law a-law a-inv
4
u-law
TC CGA
idle busy
idle
LB
off dgtl anlg
off
PATTERN
none D-mW quiet
none
HYBRID
set1 to set8 user
5
set1
WK DLY
00-99
6
0
WINK
00-199
6
0
SIG CONV
off on
off
RATE
64K 24K,1 32K,1 40K,1 24K,2 32K,2 40K,2 7
64K
ADPCM
n/a P1 P2 P3
n/a
OHD TOUT
1600ms - 3300ms
8
3300ms
Summary of Contents for IMACS 8000
