64 6238 Wi-Fi Router with VOIP User’s Guide 6238-A2-ZB20-10
•
PSTN Route Rule
— For incoming calls using PSTN, this is the line (line 1
or line 2) that the call is received through. You can select
auto
so that it
automatically selects an open line.
•
Route PSTN to VoIP
— For incoming PSTN calls you can select whether or
not you want to route the call to use VoIP.
•
Route VoIP to PSTN
— For incoming VoIP calls you can select whether or
not you want to route the call to a PSTN line and which VoIP line you want
to be able to route to the PSTN line.
Note: There are 2 VoIP lines and only 1 PSTN line, therefore only one
of the VoIP lines can have the option of being routed to a PSTN line. The
options here are to select which VoIP line (line 1 or 2) will have the service
of being routed to a PSTN line.
•
Locale Selection
— The location of the router.
•
Remote Server for SIP Log Messages
— If you enable the remote server,
then fill out the following two fields:
Log IP Address
and
Log Port
.
•
Log IP Address
— The IP address of the remote server for SIP log message.
•
Log Port
— The port number of the remote server.
Phone1 & Phone2 Default Connections
Factory default configuration set the
Default Connect to PSTN
to
Disabled
and
assigned
Phone1
and
Phone2
to connect to the VoIP network as shown below:
When the
Default Connect to PSTN
is enabled for either
Phone1
or
Phone2
or
Both
, as shown below:
