56 6238 Wi-Fi Router with VOIP User’s Guide 6238-A2-ZB20-10
Wireless Bridge
In this next screen you can select the mode, either
access point
or
wireless bridge
that
you want the router to be in. In the screen below, Bridge Restrict is enabled, therefore
you see the
Remote Bridges MAC Address
fields. If Bridge Restrict is disabled, then
there is nothing left to do afterwards. Click on
Save/Apply
to continue.
Advanced
Advanced features of the wireless LAN interface can be configured in this section.
Settings can be configured for the following:
•
AP Isolation
— If you select enable, then each of your wireless clients will
not be able to communicate with each other.
•
Band
— A default setting at 2.4GHz – 802.11g
•
Channel
— 802.11b and 802.11g use channels to limit interference from
other devices. If you are experiencing interference with another 2.4Ghz
device such as a baby monitor, security alarm, or cordless phone, then change
the channel on your router.
•
Auto Channel Timer—this value cannot be changed.
