Zhone 4929 DSLAM Installation And User Manual Download Page 47

Page: 47 / 96

Global Set

4929-A2-ZN20-30

4929 DSLAM Installation and User’s Guide

Click on Submit.

Global IP Rules

To configure IP rules:

Click on the Global IP Rules tab. The Global IP Rules screen appears.

Fixed/Max

Specify the handling of VLAN priority (used

only if the received packet is already tagged):

Fixed – The packet's original priority will

automatically be replaced with the Priority

specified above,

Max – The packet's original priority will be

replaced with the configured Priority only if

the packet's original priority is greater than

the configured Priority.

Ingress Limit

Specify the ingress limit in kbps for packets

matching this rule.

Egress Limit

Specify the egress limit in kbps for packets

matching this rule.

Parameter

Description

Summary of Contents for 4929 DSLAM

































































































Search results

Summary of Contents for 4929 DSLAM

Reviews:

Related manuals for 4929 DSLAM

Brands by name

Popular brands

Zhone 4929 DSLAM, Installation And User Manual

Search results

Summary of Contents for 4929 DSLAM

Reviews:

Related manuals for 4929 DSLAM

Brands by name

Popular brands