11
Installation
• Unlock the roll axis, slightly loosen the thumb
screw of it, push the camera to move left or
right until the camera can stay still and hori-
zontal to the ground (as shown on the right).
Complete this step by tightening up thumb
screw.
• Unlock the pan axis, slightly loosen the thumb
screw of it, then adjust the pan axis until it
stays still and horizontal to the ground (as
shown on the right). Complete this step by
tightening up thumb screw.
1. Before turning on the stabilizer, please make sure the motors are unlocked
and are free to move. Turning on the stabilizer with the motors locked will
result in overheating of the motors and cause damages.
2. The balance of the stabilizer will help it to achieve the best performance
and prolong its runtime.
Pull the quick release plate thumb
screw out a little if it becomes stuck
during the installation.
Summary of Contents for Crane 3 Lab
Page 2: ...Z H I Y U N E N v 2 1 0 CRANE 3 LAB User Guide ...
Page 37: ......