01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
Instruction
On/Off
Machine charging
Connection network for the machine
Reset method:
*To ensure that the robot vacuum cleaner can be networked,
place the charging stand within the range covered by WiFi.
Placement of the charging stand
1. In case the main machine is being charged on the
charging stand, it will automatically turn on.
2.During its charging, the machine cannot be turned off.
3.Long press the power key, the power indication light will
light up and the machine turns on. Meanwhile, there will
be a voice prompt after completion of turning on.
4. In case the main machine is static, long press the
power key to turn it off.
3. If the machine is turned off automatically due to low
power, you can manually take it back to the charging
stand for charging. Make sure the charging electrode is in
good contact and check whether the charging indication
light is on.
4.After the machine is fully charged, please turn it off if it
doesn’ t work. If the charging is kept for a long time,
which may damage the battery.
Before connecting the network, please make sure that the
mobile phone and the machine are within the WiFi cover-
age and as close as possible to the router.
In case the router configuration or the password is
changed, or the mobile phone cannot be connected to the
device due to other reasons, reset the WiFi of the
machine for pairing.
After turning on the machine, press both the power key
and the recharge key simultaneously for 3 seconds until
you hear the voice prompt and the WiFi indication light
slowly flashes, which indicate that the WiFi reset is suc-
cessful.
Device pairing:
Open the APP to add device and operate by following
APP prompts.
* Robot vacuum cleaner does not support 5G WiFi;
*And it does not support WiFi with WEP encryption.
Place the charging stand on a horizontal floor against the
wall and ensure enough space on both sides and the
front side of the charging stand. Connect the power
adapter to the charging stand and plug the power adapter
into the power outlet.
1. After cleaning, the machine will automatically return to
the charging stand for charging. If it cannot return to the
charging stand, try to remove the obstacles around the
charging stand or take the cleaner back to the charging
stand for charging.
2.During the cleaning, if the battery of the machine is
lower than 20%, it will automatically return to the charging
stand for charging. After the battery is fully charged, it will
automatically return to the breakpoint to continue clean-
ing.
Summary of Contents for ZK901
Page 2: ......
