50
WARNING!
Petrol is extremely flammable and is explosive
under certain condition. Refuel in a well-ventilated
area with the engine stopped. Do not smoke or allow
flames or sparks in the area where the engine is
refueled or where petrol is stored.
3: perform the following antirust procedures in
cylinder inside:
Remove the spark plug cover, fix it to near plastic
parts with rubberize fabric or cord, let it separated
from the spark plug.
Poor a tablespoon (15-20cc) of clean engine oil into
the cylinder, then cover the spark plug hole with a
cloth.
Operate the kick starter several times to distribute the
oil.
Reinstall the spark plug and spark plug cover.
4: discharge the storage cell and putting in the place
without freezing and direct sunlight. Charge it one
time per half year.
5: wash and dry the motorcycle. Wax all painted
surfaces.
6: lubricate the drive chain.
7: inflate the tires to their recommended pressure.
Place the motorcycle on blocks to raise both tires off
the ground.
REMOVAL FROM STORAGE
1: Uncover and clean the motorcycle. If storage has
lasted more than 4 months, replace the engine oil.
2: charge the storage cell if necessary then reinstalls
it on the original position.
3: drain the nebulous anti-rusting oil remained in fuel
reservoir. Fill the fuel tank with fresh petrol.
Summary of Contents for PST50-2
