DKC400(U) & DKC400(U)Y SLIDING GATE OPERATOR USER’S MANUAL
Tab. 2
Limit switch
Rack
Magnet bracket
Block
Magnetic limit switch
Steel
Style I (see Fig.9)
/
Style II (see Fig.9)
/
Nylon
Style II (see Fig.9)
/
Spring limit switch
Steel
/
Style III (see Fig.11)
/
Style IV (see Fig.11)
Nylon
/
Style III (see Fig.11)
/
Style IV (see Fig.11)
Note: the rack and magnet bracket / block came with your gate operator depends
on your order, select the proper installation method according to your needs.
Manual operation (see Fig.12)
In case of power failure use manual release key to open or close gate manually, use the
release key as follow:
Remove the cover.
Fit the supplied key in the hole.
Turn the key
counterclockwise
to release the clutch.
Open and close the gate manually.
After power-restored use the manual release key to engage the clutch by turning the
key
clockwise
and resume normal operation.
Insert the key
Counterclockwise to release the clutch.
Clockwise to engage the clutch.
Release here
Fig.12
9
DKC400(U) & DKC400(U)Y SLIDING GATE OPERATOR USER’S MANUAL
6. Connecting ----DKC400(U)
Make sure the control box power switch is OFF before connecting.
The DKC400(U) has a terminal block, Fig.13 shows the wiring of motor and limit switch, the
DKC400(U) is not equipped with control box, the control box (XF24W or XF24U) can be
purchased through your dealer.
Three different types of control boards (See Fig.14 KZB01 control board with SCR, Fig.15
KZB05 control board with relay, Fig.16 KZB13 control board with SCR & relay) can be used for
the control box, identify the type of your control board before connecting, select the proper
board diagram according to your order and connect the external button switch and safety
devices see Fig.14 - Fig.16 and wiring notes. Programming and adjusting refer to 8.CONTROL
section.
DKC400U GATE OPERATOR
DKC400 GATE OPERATOR
YELLOW
AND GREEN
BLACK
BROWN
BLUE
WHITE
RED
BLUE
POWER
AC220V
MOTOR
LIMIT SWITCH
W
V
COM/U
OPEN
COM
CLOSED
SWITCH
RELEASE
Terminal block inside
the gate operator
XF24W CONTROL BOX
Terminal block inside
the gate operator
YELLOW
AND GREEN
BLACK
WHITE
RED
BLUE
XF24U CONTROL BOX
POWER
AC110V
MOTOR
LIMIT SWITCH
W
V
COM/U
OPEN
COM
CLOSED
SWITCH
RELEASE
WHITE
RED
Fig.13
10
