background image

KXDMOTO.de

 

 

clothing correctly to ensure your safety. 

Protective clothing consists of these parts below: 

 

 

 

!  Every  check  and  inspection  step  above  is  necessary,  there  is  danger  existing  when  driving.  Please 

conform the above process before driving, and operate in accordance with the standard strictly when 

driving  will  protect  your  and  life  safety.  The  warning  sticker  put  on  the  surface  of  vehicle  includes 

important  safety  information.  User  must  comprehend  fully  and  act  strictly.  It  will  cause  the  extreme 

injure and even death, if not carefully checking or executing. 

 

Starting 

Following the steps below to start the engine: 

1. Park the vehicle on the flat ground. 

2. Turn on the key switch to "NO" position. Make sure it’s well connected. 

3. If the engine doesn’t start, please open the choke valve first. Try again. Close the choke valve, when 

the engine steady runs.     

3. At the beginning, turn the throttle slowly.   

 

Training   

Unprofessional  person  may  not  understand  the  large  information  of  this  part.  So  ”Training  "will  not 

explain in details . 

Advice: Learn from local professional institution or the retailer.

 

Operating  and  driving  way  in  the  first  or  second  weeks  may  affect  the  vehicle  future  performance. 

Please pay more attention. 

During this period, do not turn the throttle into maximum, should alter the speed often.   

After training period, maintain the vehicle according to maintenance form strictly. Keep the vehicle in 

good condition. 

Training  is  necessary.  Improper  operation  will  result  in  the  vehicle,  and  result  in  serious  injuries  and 

death. 

If the driver is without the safety awareness or driving experiences, please drive it under the supervision 

of the adults.   

 

Riding   

Before driving, please review the safety driving way and its importance. 

1. Pay attention to the brakes working condition always.   

2. Driving with only one hand is dangerous and forbidden.   

3. Turn the throttle slowly. Never turn it suddenly. 

KXDMOTO.de

KXDMOTO.de

 

 

4. Release the throttle and use the brake, to make it slow down. 

5. Make sure both the front brake and the rear brake work at the same time when braking. Never force 

too hard, that will reduce the working life of the brakes.   

6. Do not make dangerous movement while driving to ensure safety. 

 

Parking 

1. Turn back the throttle and brake at the same time. 

2. Turn the key to "OFF" position when the vehicle stops, then take out the key. 

3. Parking function is recommended at this moment to avoid sliding. 

 

Cleaning 

After every riding, the driver should clean the vehicle. Then place it on flat ground to clean, and then 

check. 

1. High pressure air or water will harm the vehicle. 

2. Do not splash water on these parts: key switch, cables, and battery. 

3. Generally, to wash the vehicle with clean water.. 

4. Do not turn on the key switch immediately after cleaning. 

5. Chain should be daubed with lubricating grease. 

 

Storage 

The quality will be influenced if you do not use vehicle for a long time. Before storage, vehicle must be 

checked to ensure it is in a good condition. 

1. Check the weight of vehicle from the parameter list. 

2. Clean up the vehicle, and then wax its surface. 

3. Turn off the key switch   

4. Clean the chain, and then lubricate it.   

5. Lubricate all the cable parts.   

6. Place the vehicle well-packed in a cool ventilated place to avoid damp and sun exposure. 

 

Transport 

This is a process of transport the well-packed vehicle.   

1.  Check the weight of vehicle from the parameter list. 

2.  Ensure the package well protects the vehicle.   

3.  Ensure the vehicle is well fixed on the trailer or forklift. 

4.  Handling with care. 

             

Delivery 

This is the process of delivery the well-packed vehicle.   

1. Check the weight of vehicle from the parameter list. 

2. Ensure the vehicle is placed normally. Do not turn it upside down or 

side lay it.

 

3. Ensure the vehicle is well fixed on the trailer or forklift. 

4. Handling with care. 

 

Maintenance 

Unprofessional  person  may  not  understand  the  large  information  of  this  part.  So"  Training  "will  not 

explain in details .For more details ,please contact local retailer. 

KXDMOTO.de

Summary of Contents for KXD series



















Reviews: