1
1
2
2
3
3
5
6
4
Attach the Steering Column
│
9
R/C type
Hole in the
front axle linkage
R/C
driver
Front bottom view
●
Turn the vehicle body on its side. Remove the
M5x22 machine screw
and
Ø5 nut
from
the
R/C driver
with a screwdriver.
1. Attach the
R/C driver
to the
steering gear box
, and make it match with steering gear
box.
2. Insert the
straight end of steering column
up through the
hole in the R/C driver, the
hole in the steering gear box
from the bottom side, and out through the
hole in the
dash
.
3. Line up the
holes in the R/C driver
and the
hole in the steering column
, tighten a
M5x22 machine screw
and
Ø5 nut
back in the same location with a screwdriver.
4. Insert the
bent end of steering column
through the
hole in the front axle linkage
.
5. Fit a
Ø
10 washer
to
the bent end
of the steering column.
6. Insert a
split pin
into the hole in the steering column, bend the ends of split pin back
using
a
long nose pliers (not included).
