23
2. Recording operation
The default recording mode after the startup of DVR is 24 continuous recording for each channel. Users can
program customized recording modes due to the necessity. Instructions for the different recording modes are as
follows:
a) Schedule recording
·Enter the menu, and set the timing period for the recording. See details at Menu>System setting>Schedule
b) Manual recording
·Press “Rec” button on the remote controller or “
●
” on the front panel (Need input the administrator password)
·Check the status of each channel in the recording menu; “
●
” channels are in recording, while “
○
” means the
channel is not in recording
·Select the channel to be recorded, please press the related number key(or use “
S
T
” key / Jog shuttle choosing)
make the channel “
●
” on the screen then press
Enter
to start the recording.
·Repeat above steps and make the channel “
○
” to stop the camera from recording.
·Press ESC to return and press ENTER to save the recording setting
c) Alarm recording
·Connect the alarm input according to the device connection and the instructions
·Made the related setting in the menu to start Alarm recording. See details at Menu>Setting>Alarm setting
d) Motion detection recording
· Record the channel only in need of motion detection. First confirm whether this channel is in schedule recording;
if it is, please turn off schedule recording.
·Made the related setting in the menu to start Motion detection recording
，
See details at Menu>Setting>Motion
detection
