3. DISASSEMBLY
9
Repair Manualand Spare Parts List
Section 3
3
4
2
1
FIG. 1 - 1
1
2
3
FIG. 1 - 2
INTRODUCTION
Clean the transmission thoroughly on the outside be-
fore disassembly.
The repair area should be clean and well lighted.
ZF HURTH MARINE recommends using a swiveling
stand for aiding in assembly and disassembly.
3.1 FLUID FILTER
3.1.1 Remove fluid filter
Turn the screw that fixes the oilfilter cover in a counter-
clockwise direction and remove the filter from its hous-
ing (item 1, fig. 1-1). Use a 6 mm Allen wrench.
Pull filter element off (item 2, fig.1-1).
Check O-rings (item 3 and 4, fig. 1-1) for wear, replace if
necessary.
3.1.2 Suction of transmission fluid
Push hose of suction pump (item 1, Fig. 1-2) through
the suction pipe (item 2, Fig. 1-2) down to the bottom
of the housing and suck the fluid off.
3.1.3 Suction of transmission fluid on
ZF 63 IV, ZF 80IV, ZF 80-1 IV and
ZF 85 IV
Remove the plug (item 3, Fig. 1-2) and let the oil flow
from the proper hole.
+
|
IMPORTANT
|
The used oil and the oil filter are to be handled as
special waste that pollute the environment.
For the safe disposal of used oil and filter, take all
the measures required by the relevant local rules
and legislation.
Swiveling stand ZF
Output - half side up
Swiveling stand ZF
Input - half side up
All manuals and user guides at all-guides.com
all-guides.com
Summary of Contents for ZF 63 IV
