ZF CruiseCommand 785CE, Installation And Troubleshooting Manual

Page: 36 / 160

SET-UP PROCEDURES
Page 28
• The second two digit pads indicate the numeric Value that is currently
programmed into the Processor for that particular Function.
A decimal indicator is located on the bottom right corner of each pad.
(Refer to Figure 24:)
6.1.2 Processor Arrow Push Buttons
The Processor has four Push Buttons with arrows located below the Dis-
play. These push buttons are used to scroll through, select, and store the
Functions and Values. Refer to Figure 25:
6.1.3 Up and Down Arrow
Depress either Once. (Refer to Figure 26:)
• Stops Display Normal Operating running center red dash lines and
activates Function Menu.
• When in the Function Menu, scrolls the Function type one at a time.
• When in Set-up, scrolls one Value’s number one at a time.
• When Error Code is displayed, scrolls through the error messages one
at a time.
Figure 24: Display Pad Definitions
Figure 25: Processor Arrow Push Buttons
Figure 26: Up and Down Arrow Push Buttons
Decimal Indicators
Arrow Keys