background image

SET

CAUTION

1. 

2.  

Interference may occur in the vicinity of equipment marked with the following symbol        . And 

WS-380 may interfering vicinity electrical equipment.

Sensitive people, including pregnant women pre-eclamptic and those who implanted medical 

electronic instruments, should avoid using the unit whenever possible.

Keep the monitor at least 20 centimeters away from the human body (especially the head) when the 

data transmission is proceeding after measurement.

To enable the data transmission function, this product should be paired to Bluetooth end at 2.4 

GHz.

How to mitigate  possible interference?

The range between the device and BT end should be reasonably close, from 1 meter to 10 meters. 

Please ensure no obstacles between the device and BT end so as to obtain quality connection and 

to lower the RF output range.

To avoid interference, other electronic devices (particularly those with wireless transmission / 

Transmitter) should be kept at least 1 meter away from the monitor. 

Recall the Records

1

.

2

 

The 

corresponding 

time is 6:35.

The 

corresponding 

date is 25th 

December.

Press “     ” button or “     ” button to 

get the record you want.

When the monitor is off, press “     ” 

button to show the average value of the 

latest three measurement records. If the 

records are less than 3 groups, it will 

display the latest record instead.

The record number, date and 

time of the measurement records 

will display alternately.

The record 

number is 

No.1. Two 

records in 

total. 

MEASUREMENT

DATA MANAGEMENT

25

24

Summary of Contents for WS-380


























Reviews: