11
Chapter 9: PROGRAMMING YOUR DEVICE AS A TENS
1. Turn the device ON
•
Press “ON/OFF” button to turn the unit ON.
•
The most recently selected treatment status is displayed.
2. Turn the device OFF
•
The device turns off automatically after the therapy session time has elapsed.
•
The device will turn off after 60 seconds if no button is pushed.
•
To turn the unit off manually, press “ON/OFF” button for 3 seconds.
Note:
To prevent unpleasant electric shocks, never move the lead wires or electrodes while the
device is still turned on.
3. System Function Selection
To select the stimulation modality (TENS, EMS), follow these steps:
•
Press the “MODE” button. The device will show your current settings.
• To make changes, press “MODE” again and TENS or EMS will start flashing depending on
your previous setting.
•
To make changes, press the “UP” or “DOWN” button.
• Once you have selected TENS, press “MODE” again and the modes start flashing. Continue
with step 4.
4. Mode Selection for TENS
The device features 3 different modes for a TENS treatment: Constant ( C ), Burst (B), Modulated Width (M).
• The last selected Mode setting is flashing.
•
To make change, press the “UP” or “DOWN” button.
•
Once you have selected your Mode, press the “MODE” button again and the pulse rate starts
flashing. Continue with step 5.
5. Parameter Setting (pulse rate and width)
To adjust the pulse width and pulse rate settings, follow these steps:
•
To adjust the pulse rate (Hz), push the “UP” or “DOWN” button (1 – 150Hz).
• Press the “MODE” button and the pulse width starts flashing (uS). Press the “UP” or “DOWN”
button to change the pulse width (30 – 300uS).
•
Once you are done changing the pulse rate and pulse width, press the “MODE” button and
the display stops flashing indicating your programming is finished. The display will show your
final programming.
