13
Troubleshooting Guide
Problem
Cause
Remedy
LED fails to
illuminate
No battery in the
device or the
battery is flat
Battery is insert-
ed incorrectly
The device is not
switched on
The plastic film
between the
battery and the
device has not
been removed
Replace the
battery
Insert battery
with the positive
(+) facing up
Switch the de-
vice on
Remove the
plastic film
between the
battery and the
device
LED
illuminates but
only weakly
low battery
Replace the
battery
Weak device
output
Electrode pad
dirty
Device not ap-
plied properly
Clean/replace
electrode pad
Re-apply Device
LED
illuminates
but there is no
power output
Flat battery
Electrode pad
dirty or short-cir-
cuited
Replace battery
Check the
electrode pad
and replace if
necessary
Device switches
off prematurely
The battery is
flat
The electrode
pad worn out or
dirty
Device is applied
incorrectly
Replace the
battery
Check the
electrode pad
and replace it if
necessary
Re-apply device
Summary of Contents for SpaBuddy Mini Go
Page 17: ...17 Placement of Electrode ...