52 V00 Installation and operating instructions
9.2 LED indicators
The inverter is equipped with three LED including “green”, “red” and “bicolor” which
provide information about the various operating status of the inverter as follows.
Green LED:
The green LED is lit when the inverter is operating normally.
Red LED:
The red LED is lit when the inverter has stopped feeding power into the grid due to a
fault. The corresponding error code will be shown on the display at the same time.
Bicolor LED:
The bicolor LED can blink green or red. It blinks during communication with other
devices such as a ZeverManager, Solarlog, etc. The bicolor LED blinks green when
the inverter is receiving commands from other devices, and blinks red when the
inverter is sending response commands to the other devices.
Summary of Contents for Zeverlution Pro 33K.
Page 1: ......
