Safety instructions:
The scanner must only be operated with a single-phasing power supply of 230
V/50 Hz with separate protective conductor. Before operation the power
supply must be checked by an authorised service engineer.
If the local power supply does not meet the above mentioned requirements,
please contact the manufacturer who will check if the scanner system can be
operated under the existing power supply conditions.
The power socket should be installed near the camera system and should
always be accessible.
It is not allowed to open the scanner system, as the system is still live even if
the mains switch is turned off.
After the scanner is switched on, the following functions will be automatically
executed:
Automatic initialisation of the scanner head
Top light is automatically switched on.
The following works must be executed by service engineers only:
1.
Exchange of lamps/bulbs
2.
Exchange of software programs
3.
Interferences in control system, power supply
It is necessary to study the operator's manual carefully before operating the
scanner system.
4
