Treadmill
10811
Instructions for Use
Please read and retain these instructions for future reference
v004
: 04/09/20
TROUBLESHOOTING:
Fault
Cause
Solution
Does not Function
Lack of Power.
Check fuse in plug. Replace fuse if blown.
Check plug is connected to mains socket
and power is switched ON.
Working speed is slow or
not constant.
Voltage is low.
Check power connections.
Check power supply is correct voltage.
Switch off and restart when voltage is
correct (220-240V a.c.)
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363 13-amp plug. If you have to replace the fuse, only those that
are ASTA or BSI approved to BS1362 and with a rated current of 13-amps should be used. If there is a
fuse cover fitted, this cover must be re-fitted after changing the fuse.
If the fuse cover is lost or damaged the plug must not be used. Spare fuse holders and fuses are
available from electrical outlets. If the socket outlets in your home or office are not suitable for this
product’s plug, the plug must be removed and disposed of safely. Attempts to insert the plug into
the wrong socket is likely to cause electric hazard. A replacement plug should be wired according to
the following instructions:
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer
layer of flexible plastic. This product is earthed; the wires in the cord set are colour coded in the
following way:
The diagram shows the key features of a
correctly wired three-pin mains plug.
BLUE
NEUTRAL
BROWN
LIVE
GREEN & YELLOW
EARTH
DISPOSAL
•
Coopers of Stortford use recyclable or recycled packaging where possible.
•
Please dispose of all packaging, paper, cartons, packaging in accordance with your
local recycling regulations.
•
Plastics, polybags – Contains the following recyclable plastic.
