2/20
Fixing Instructions Doc. version 2
FV400
Triple IR Flame Detectors
ment of the angle and must also allow space for
the cable assembly.
A clearance of 200 mm, in all directions, from the
fixing point will normally be sufficient to allow
the full range of adjustment as shown in Fig. 2.
A drilling template is provided to allow optimum
selection of the fixing centres.
1 To secure the mounting bracket onto the cho-
sen surface:
– Use four M8 bolts, studs or screws at the
fixing centres. (Refer to the orientation as
shown in Fig 1).
2 To secure the detector onto the mounting
bracket:
– Use M6 bolts, stud or screws at the fixing
centres shown in Fig 3.
Fig. 2: Adjustable Mounting Bracket and Surface Mounting Dimensions
124 mm
92 mm
181 mm
122 mm
94 mm
