3.
Put the slide switch of ZIR32 to the right under gear icon (custom position)
4.
Download, install and run the Zetta Widget
http://www.zetta.com.hk/index.php/supports/downloads
5.
In the Zetta Widget, disable all other triggers and only set the “Ext-Trigger in
contact Type" to "Normal Open", and press "Sync Settings to DVR"
6.
Safely eject the 2 removable drives from computer
7.
Testing: Insert a FAT32-formatted microSD card into ZIR32 and turn on the
ZIR32, wait for the green LED flashes and then off. It is in standby mode now.
Press the “ON” button on the remote control transmitter, the ZIR32 should wake
up and then green light should be flashing. That means the ZIR32 is recording.
8.
To select the triggering mode in receiver, connect J2 to GND or VDD
•
GND: Continuously sending signal to ZIR32 and ZIR32 will record
continuously until the OFF button is pressed
•
VDD: Only sending signal to ZIR32 for 10 seconds and ZIR32 will record
for 2 minutes and ZIR32 will be in standby mode again
9.
Pair up with other devices that made by Zetta
a. Press the KEY switch in the receiver one time to pair up with other transmitters
(e.g. PIR body heat trigger, door-open trigger)
b. The LED will be on
c. Trigger the transmitter one time so that the receiver will learn the code from the
transmitter
d. If the receiver gets the signal, the LED will be off
e. When 4 transmitters are added to the receiver, no more transmitters can be
added. To add new transmitter, the user needs to erase all the memory stored in
the receiver by pressing the KEY switch for more than 5 seconds. The LED will
flash 3 times meaning that the memory is cleared.
Specification
Storage temperature: 0 to 45degC (32 to 113degF)
Operation temperature: 0 to 45degC (32 to 113degF)
Transmitter battery type: 2 x CR2016
Transmitter standby current: 0uA
Receiver voltage input: 2.8V
Receiver standby current: 2.7mA
ZIR32 standby time (by internal 2400mAh battery): 30 days
RF distance: 80 meter (250 feet)
RF frequency: 433MHz
Remote control code: 2262
Zetta Systems Limited
Unit 513, Lakeside 1, HK Science Park, Shatin, Hong Kong
Tel: (852) 3188 4492 / (1) 415 373 6020 / (44) 020 3239 3882
Email: [email protected]
Website:
www.zetta.com.hk
V1.1
