Zetta ZIR32 Infrared HD Security Camcorder Quick Start Guide
www.zetta.com.hk
(2) Indoor Lighting Condition
50Hz: Suitable for Asia*, Europe, Africa, Australia and South America**
60Hz: Suitable for North America and South America**
*In Asia , some countries are using both 50Hz and 60Hz frequency.
For example, in Japan, Tokyo is 50Hz and Hokkaido is 60Hz.
** In South America, Argentina and Chile are 50Hz. Brazil and Colombia are 60Hz.
For more information about the frequency of other countries, please visit the website:
http://www.controlledpwr.com/help-international-voltages.php
(3) Day/Night Mode
Night mode: For recording in dark environment, infrared night vision will be automatically
turned on.
Auto switching: ZIR32 will switch to “Day mode” or “Night mode” depending on the
brightness level of the environment.
Remark:
This device is not considered harmful, but the following precautions are recommended:
1. Avoid direct eye exposure to the infrared LED beam
2. Be aware that the beam is invisible light and cannot be seen
3. Do not attempt to view the infrared LED beam with any types of optical device
(4) PIR Trigger
Start to record when body heat is detected
(5) Voice-Trigger Sensitivity
High: Even little sound can trigger recording
Low: Only substantial sound can trigger recording
(6) Vibration-Trigger Sensitivity
High: Even little vibration can trigger recording
Low: Only substantial vibration can trigger recording
(7) Vibration Trigger Standby Mode
Fast Wakeup: Start to record immediately once vibration is detected
Power Saving: ZIR32 is completely off until it detects vibration. The standby
time can last up to six months.
(8) Motion-Trigger Sensitivity
High: Even little movement can trigger recording
Low: Only substantial movement can trigger recording
Trigger In/Out (Support external devices with Normal
Open, Normal Close Contact Type)
Application: ZIR32 can connect to external device such as smoke detector, pressure detector,
vibration detector and door/window sensor to trigger recording, or GSM alarm and buzzer for
alarming function.
Position
Pin assignment
Pin 1: 2.8V, 100mA (max) Power out
Pin 2: Ground
Pin 3: ZIR32 Trigger in+
Pin 4: ZIR32 Trigger in-
Pin 5: ZIR32 Trigger out+
Pin 6: ZIR32 Trigger out- (Ground)
Power out
Function: It can supply power to external device.
Note: 1. No need to use this power out if the external device has already had its own power
supply.
2. Power out (Pin 1): Voltage is 2.8V. The maximum output current is 100mA.
Top view
Trigger in / out port
Figure 1
Figure 2
5
6
