zPen-HD Manual
NOTICE
The information in this manual is subject to change without notice. Zetronix Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages furnishing from the furnishing or use of this material.
Getting Started
The first step in using your device is charging it. Connect the device to a USB port on your PC or plug it into AC
power with the included adapter. While charging, the LED indicator
will blink yellow and
will become solid when
the battery is full. Before first use, we suggest charging the device for 4 hours.
If you plan on viewing your files on your computer, we suggest using VLC Player. The most recent version can
be downloaded at no cost from
http://www.videolan.org
.
To power the device on, hold down the ON/OFF button for 2-3 seconds. The LED indicator will be yellow/blue
while the device is booting. When in video mode (Mode Switch 2) the pen LED will glow yellow for 2 – 3 sec
then will automatically stat recoding and the LED will change to blinking blue. The pen will blink 3 times to let
you know the device is recording then stop blinking and remain 100% stealth while recording. To power the
device off, hold down the ON/OFF button for 2-3 seconds, and the LED light will turn off.
Recording Video
To record video, move the Mode switch to the 2nd position (all the way to the left). While in video standby, the
LED indicator will be
yellow
. Press the Record button to begin recording video. The LED will blink blue while
recording. The pen will blink 3 times to let you know the device is recording then stop blinking and remain
100% stealth while recording. Press the Record button again to save your current file and stop recording.
(The devices will automatically stat recording after it has booted up)
Taking Photos
To take photos move the Mode switch to the 1st position. After the device is turned on in Mode Switch 1 it will
automatically start recording audio after boot up (Yellow LED will be slowly blinking.) Press the Record button
once to stop recording audio; the yellow LED will be solid. To take a photo press the record button, the LED will
blink blue to indicate it is capturing and storing your photo, and will return to solid green.
Recording Audio
To record audio, move the Mode switch to the 1st position. Turn the unit on and the unit will automatically start
recording audio after booting up. While recording, the LED will slowly blink yellow. To stop recording and save
the file, press and hold for 2 – 3 to shut the pen off. To start recording again press and hold the record button
to turn it on and the pen will start automatically recording.
