zDive-i Manual
NOTICE
The information in this manual is subject to change without notice. Zetronix Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages furnishing from the furnishing or use of this material.
Getting Started
The first step in using your device is charging it. Connect the device to a USB port on your PC or plug it into
Car power with the included adapter. While charging, the RED LED indicator
will glow red and
will turn off when
the battery is full. Before first use, we suggest charging the device for 12 hours for the first three times. To
maximize battery life we suggest using the product for the first three times until the battery has completely run
out then recharging it again for 12 hours
If you plan on viewing your files on your computer, we suggest using VLC Player. The most recent version can
be downloaded at no cost from
http://www.videolan.org
.
Set Time & Date
Before recording video or using the product in your car we suggest setting up the time and date on the unit, so
the video will have an overlay of the correct time and date in the video on when it was recorded. To set up
time and date 1
st
plug the unit to your TVs or Monitors Video Input using the supplied AV Cables.
