5.
In the Video Motion dialog
ensure the “Enable” checkbox is checked.
a)
Sensitivity:
You may change the motion detection video “Sensitivity” to
prevent it from recording unnecessarily due to slight changes in lighting or
shadows or increasing it to detect unnoticed quick motion.
b)
Region:
This will allow you to “draw” to the screen witch areas of the
viewable image should and should not be sensitive to motion.
On the example image, recording will occur
only during motion on the outside the window
seen within the selected view.
c)
Delay:
The amount of seconds the camera will
continue to record since the last time motion
was triggered.
Hit “OK” to save any changes. The zClock30w will now record to the memory card
once it detects motion.
b
a
c
