Motion
Activated
Record
Press
the motion detect button
1#
to go into motion activate
d
mode.
Anytime theres a change in the video image v
ideo will start
record
ing
.
The indicator light will flash 3 times and go out.
Hitting
the motion detect button
1#
again will stop the recording putting
the camera device back into stand by mode indicated by a solid
green light
r
.
When recording is triggerd by motion, the camera
will record for
one
minute before it stops.
PIR Motion Video Recording
Hit the PIT motion detect button
1%
to go into PI
R
motion activate
d
mode. Video will record
ing
anytime theres motion in front of the
PIR sensor
o
.
The light will blink 3 times and go out.
Hitting the PIR
motion detect button
1%
again will stop the recording putting the
camera back into stand by mode indicated by a solid green light
r
.
When recording is triggerd by motion, the camera will record for at
least a minute before it stops
going back to standby
.
Taking Photos
Ensure the camera is on standby
with a solid green light
r
, then
press the photo button
1@
to snap a picture. The light
r
will flash
once idicating the picture was saved.
Recording Modes
The Atom has 3 modes or operation; Motion Activated, Continuous
Recording and PIR Motion Recording. Before changing its
recording mode, please ensure the camera is on standby
(solid
green light
r
)
where video is not currently being recorded. To
pause any recording,
press
the
v
ideo record
1$
button at any time.
Continuous Recording
Press
the video record button
1$
to start recoding. The green light
will flash 3 times
and go out
indicati
ng
recording has started.
Pause
the recording by pressing
the
video record
button
1$
again.
OPERATION
