ZETRON 4010, Programming Manual

Page: 94 / 117

Appendix D. CPS Menu Structure
F. Miscellaneous
Miscellaneous panel configuration functions are shown in Figure D-48.
A. Audio Source for ‘Soft’ Xmit Keys
B. Instant Select Key Display Mode
C. Received ‘Call’ light duration
D. Dynamic Mic selection
E. Parallel Remote Status enabled
Selection [ ]
Figure D-48. MISCELLANEOUS Menu
1) Audio Source for Soft Xmit Keys
The menu shown in Figure D-49 allows you to specify the transmit audio source
(Microphone) when a “soft” transmit key is activated. Refer to Table 4-2 in Section 4 of this
manual for a description on microphone steering.
A “soft” transmit key is defined as a programmable panel key or spare input which has been
defined as a transmit key.
A. Dynamic Mic (Deskmic/Gooseneck)
B. Electret Mic (Handset/Headset)
C. Spare Input #9 steered
D. Hookswitch steers ‘Soft’ Xmit keys & Electret PTT
Selection [ ]
Figure D-49. AUDIO SOURCE FOR SOFT TRANSMIT KEYS Menu
D
YNAMIC
M
IC
(D
ESKMIC
/G
OOSENECK
)
This selection causes the Dynamic (“D” Mic) to always be the source of audio on soft
key transmit. The “D” Mic is the Gooseneck or Desk mic as defined by selection “D.
Dynamic Mic selection” from the MISCELLANEOUS menu (Figure D-48).
E
LECTRET
M
IC
(H
ANDSET
/H
EADSET
)
This selection causes the Electret (“E” Mic) to always be the source of audio on soft
key transmit. The “E” Mic is the handset or headset mic.
S
PARE
I
NPUT
#9 S
TEERED
Selecting this option will allow the audio source to be “steered” by an external signal
applied to Spare Input #9. See Table 4-2 in Section 4 of this manual for more
information on the steering capabilities and Spare Input #9.
D-30 025-9229C.1